top of page
Writer's picturequickreviewsandgui

Suzuki GD110 Maintenance Specs



Fuel type : Use gasoline with an octane number of 90-97(Research Method), preferably unleaded.

Engine oil Change  : 900 ml

Note: If you're replacing both the engine oil and the oil filter element, start by pouring 1 liter of engine oil into the engine. This ensures proper lubrication and smooth operation. Similarly, if only the engine oil is being changed without replacing the oil filter element, still pour 1 liter of engine oil into the engine to maintain adequate lubrication.

After overhauling engine: 1100ml

Recommended Engine oil API Standard: API SG, M A

Oil Change Interval : 2000 - 3000 km or earlier ( depends on riding conditions and engine oil type )

Spark plug Gap : 0.6 mm - 0.7 mm

Spark Plug Tightening : 1/2 or 180° for new spark plug and 1/8 or 45° turn for used spark plug

Valve Clearance : 0.03 - 0.08 mm ( inlet ) - 0.08 - 0.13 mm ( exhaust )

Check Vlave Clearance Every : 2000 - 3000km

Note: Adjust Valve Clearance on cold engine

Engine idle speed : 1500 Rpm ± 100 Rpm

Battery : 12 V , 5 A

Fuse : 15A

Clutch lever FreePlay : 10 mm - 20 mm

Front Brake Lever FreePlay  : 10 mm - 20 mm

Rear Brake Lever FreePlay  : 20 mm - 30 mm

Chain Slack : 10 mm - 20 mm

Lubricate Chain With: SAE 90 oil

Chain Lubrication Iterval : 500 km or less

Front Axle nut Torque Specs : 3.6 - 5.2 k.gf - m ( 26 - 37 Foot Pound )

Rear Axle nut Torque Specs : 3.5 - 5.5 k.gf - m ( 26 - 39 Foot Pound )

Sprocket Carrier Nut Torque Specs : 3.5 - 4.5 k.gf - m

Front Tyre Pressure : 29 Psi with Rider and Passenger

Rear Tyre Pressure : 29 Psi For only rider , 32 Psi with Rider

+ Passenger

Front shock absorber oilcapacity (each leg) : 106ml

0 views0 comments

Recent Posts

See All

Comments


bottom of page